Lansing: 517-321-8000
Grand Rapids: 616-538-2400
NE Detroit: 586-727-7502
Saginaw: 989-777-0090
Traverse City: 231-267-5060
West Detroit: 248-437-8121
| Make: | John Deere |
| Model: | 35G |
| Stock #: | U247139 |
| Serial number: | 1FF035GXEJK282967 |
| Year: | 2018 |
| Hours: | 1173 |
| Category: | Excavator |
| Location: | Lansing |
| Total price: | $34,900.00 |
| Engine: | Yanmar |
| Pad width: | 12" |
| Attachments: | Manual Wain Roy Coupler |
| Bucket size: | 24" |
| Other: | AUX |
| Cab / ROPS: | OROPS |
| App weight: | ~7,800 Lbs |
| Classification: | Job Ready-C |
|
|
| CATEGORY | (A) <1,000 Hrs. | (B) <3,000 Hrs. | (C) <5,000 Hrs | |
|---|---|---|---|---|
| RADIATOR | No leaks, Dry, No damage | No leaks, Dry | No leaks | |
| ENGINE | Starts and runs very well. No leaks. Minimal blowby. RPM’s at spec |
Starts and runs well. Minor leaks. Moderate blowby. RPM’s at spec |
Starts and runs. No major leaks Blowby not excessive. |
|
| TRANSMISSION/ TRAVEL MOTORS, FINAL DRIVES | No leaks Works properly in all speeds. |
Works properly in all speeds. | Works in all speeds. | |
| BUCKET/BLADE, WORK EQUIPMENT/GROUND ENGAGING | Edge 75% + of Wear Parts | Edge 50% + of Wear Parts | Edge 25% of Wear Parts | |
| HYDRAULICS | No leaks | No external leaks | No major leaks | |
| CYLINDERS | No internal or external leaks | No external leaks | Minimum external leaks | |
| ATTACHMENTS/ CENTER PIN | 75%+ of Wear Parts | 50% of Wear Parts | 25% of Wear Parts | |
| CAB, GLASS, SEAT, SEATBELT | Good cond, clean, no tears in seat cushions, no cracked glass. Seat belt good | Good condition, No tears in seat cushion, no cracked glass. Seat belt good. | Clean, No missing glass, Seat belt good. | |
| METAL | No damage outside. All handles, guards, steps in place and all doors working |
Minor damage. All handles, guards, steps in place and doors working | Damage allowed on non- critical panels. Doors working | |
| ELECTRICAL | All gauge/monitor panels work properly along with all enabled options. RTD works Boom float works Boom kickout works Ride Control works All Lights work properly Back up alarm works No Active fault codes |
All gauge/monitor panels work properly along with all enabled options. RTD works Ride Control works Lights working properly Back up alarm works No critical active fault codes. |
Critical gauges/monitor working. RTD works Work and rear lights working. Back up alarm works |
|
| BRAKES | Working properly | Working properly | Working | |
| TIRES/UC | 50% tread Remains. No sidewall cuts. Matched. | 35% tread Remains. Minor cuts/scratches. | 25% tread Remains. Minor cuts/scratches. | |
| PAINT | Very Good | Good | OK | |
| FLUIDS/FILTERS | 1000 hour service if needed and all new lube filters installed. | 500 hour service if needed and all new lube filters installed. | 500 hour service if needed and all new lube filters installed. | |
| WORK EQUIPMENT | 75% + of Wear Parts | 50% of Wear Parts | 25% of Wear Parts | |
| WARRANTY | 90 Day Powertrain/Parts | 60 Day Powertrain/Parts | 30 Day Powertrain/Parts | |
| Minor damage = small dents, no tears in metal, side shields & grills on core products. Major leak = any oil dripping within 5 minutes of operation at normal operating temperature. Dust build up around area does not constitute an oil leak. |
||||
Monday - Friday: 7am - 6pm
Saturday: 8am - 12pm
Sunday: On call
All contents and materials © Copyright AIS Equipment 2026
Website designed and developed by Web Ascender
