Lansing: 517-321-8000
Grand Rapids: 616-538-2400
NE Detroit: 586-727-7502
Saginaw: 989-777-0090
Traverse City: 231-267-5060
West Detroit: 248-437-8121
| Make: | Komatsu |
| Model: | PC200I-10 |
| Stock #: | W43808 |
| Serial number: | 452434 |
| Year: | 2014 |
| Hours: | 3437 |
| Category: | Excavator |
| Location: | Lansing |
| Total price: | $169,900.00 |
| Pad width: | 23 3/4” |
| Bucket size: | 40 1/2” |
| Cab / ROPS: | Cab w heat ac |
| Classification: | AIS-A |
|
|
| CATEGORY | (A) <4,000 Hrs. | (B) <8,000 Hrs. | (C) |
|---|---|---|---|
| RADIATOR | No leaks, Dry, No damage | No leaks, Dry | No leaks |
| ENGINE | Starts and runs very well. No leaks. Minimal blowby. RPMs at spec |
Starts and runs well. Minor leaks. Moderate blowby. RPMs at spec |
Starts and runs. No major leaks Blowby not excessive. |
| TRAVEL MOTORS/FINAL DRIVES | No leaks Works properly in all speeds. Pressures good. |
No leaks Works properly in all speeds. Pressures good. |
No major leaks Drives and steers. |
| UNDERCARRIAGE, OVERALL | 75%+ of Wear Life Remains | 50% of Wear Life Remains | 25% of Wear Life Remains |
| BUCKET | 75%+ of Wear Life Remains | 50% of Wear Life Remains | 25% of Wear Life Remains |
| HOE PIN AND BUSHING | 75%+ of Wear Life Remains | 50% of Wear Life Remains | 25% of Wear Life Remains |
| HYDRAULICS | No leaks All Modes Work Hydraulic Performance Calibration complete: Pump Pressures and cycle time in factory spec |
No leaks All Modes Work Hydraulic Performance Calibration complete: Pump Pressures and cycle time in factory spec |
Operatonal No major leaks |
| CYLINDERS | No internal or external leaks | No external leaks | No major leaks |
| ATTACHMENTS AND PINS | 75%+ of Wear Life Remains | 50% of Wear Life Remains | 25% of Wear Life Remains |
| CAB, GLASS, SEAT, SEATBELT | Good cond, clean, no tears in seat cushions, no cracked glass. Seat belt good. |
Good condition, No tears in seat cushion, no cracked glass. Seat belt good. |
Clean, No missing glass, Seat belt good. |
| METAL | No damage outside. All handles, guards, steps in place and all doors working |
Minor damage. All handles, guards, steps in place and doors working | Damage allowed on non- critical panels. Doors working. |
| ELECTRICAL | All gauge/monitor panels work properly along with all enabled options. All Lights work properly Motion alarm works No Active fault codes |
All gauge/monitor panels work properly along with all enabled options. Lights working properly Motion alarm works No critical active fault codes. |
Critical gauges/monitor working. Work lights function Motion alarm works |
| PAINT | Very good | Good condition | OK |
| FLUIDS/FILTERS | 1000 hour service if needed and all new lube filters installed. |
1000 hour service if needed and all new lube filters installed. |
500 hour service if needed and all new lube filters installed. |
| WARRANTY | 6 Month Powertrain/Parts | 90 Day Powertrain/Parts | 30 Day Powertrain/Parts |
| Minor damage = small dents, no tears in metal, side shields & grills on core products. Major leak = any oil dripping within 5 minutes of operation at normal operating temperature. Dust build up around area does not constitute an oil leak. |
|||
Monday - Friday: 7am - 6pm
Saturday: 8am - 12pm
Sunday: On call
All contents and materials © Copyright AIS Equipment 2024
Website designed and developed by Web Ascender
-540x388.jpg)
