AIS Construction Equipment Corp.
Lansing: 517-321-8000
Grand Rapids: 616-538-2400
NE Detroit: 586-727-7502
Saginaw: 989-777-0090
Traverse City: 231-267-5060
West Detroit: 248-437-8121
Staff login ›
Equipment /
Pre-owned /
J247189
Equipment available at our location:
AIS Traverse City
8300 M-72 East
Williamsburg, MI 49690
  • Mon-Fri: 7 AM–6 PM
  • Sat: 8 AM–12 PM
  • Sun: Closed

803MH

Stock #: J247189
Serial #: 1T0803MHVJF334731
Hours: 12004
Job Ready
$154,900.00
Description: JOHN DEERE 803MH

Make: John Deere
Model: 803MH
Stock #: J247189
Serial number: 1T0803MHVJF334731
Hours: 12004
Category: Forestry
Location: Traverse City
Total price: $154,900.00
Classification: Job Ready-C

Certification Job Ready-C

Job Ready
  • Extensive multi-point inspection performed by trained technicians
  • Meets or exceeds wear criteria for certification class
  • Planned Maintenance lube service completed
  • Powertrain parts warranty included
  • All machines work-ready
Certification ClassABC
Overall Certification
Checkmark
Age / Hours
Appearance
Powertrain
Hydraulics
Chassis
Electrical
Ground engaging
Warranty
CATEGORY      (A) <4,000 Hrs.    (B) <8,000 Hrs. (C)    Job Ready
RADIATOR No Leaks, Dry, No Damage. No Leaks, Dry. No Leaks. No Leaks.
ENGINE Starts and Runs Very Well.
No Leaks.
Minimal Blowby.
RPM’s at Spec.
Starts and Runs Well.
Minor Leaks.
Moderate Blowby.
RPM’s at Spec.
Starts and Runs.
No Major Leaks.
Blowby not Excessive.
Starts and Runs. No Major Leaks.
TRANSMISSION No Leaks
Works Properly in all Speeds.
Works Properly in all Speeds. Works in all Speeds. Works in all Speeds.
BUCKET Edge 75%+ of Work Life Remaining. Edge 50% of Work Life Remaining. Edge 25% of Work Life Remaining. Some Work Life Remains.
HYDRAULICS No Leaks. No External Leaks. No Major Leaks. No Major Leaks.
CYLINDERS No internal or external leaks No external leaks Minimum external leaks Minimum External Leaks
ATTACHMENTS/ CENTER PIN 75%+ of Work Life Remaining 50% of Work Life Remaining 25% of Work Life Remaining Some Work Life Remains
CAB, GLASS, SEAT, SEATBELT Good Cond, Clean, No Tears in Seat Cushions, No Cracked Glass. Seat Belt Good. Good Condition, No Tears in Seat Cushion, No Cracked Glass. Seat Belt Good. Clean, No missing glass. Seat Belt Good. No Missing Glass. Seat Belt Good.
METAL No Damage Outside.
All Handles, Guards, Steps in Place and all Doors Working.
Minor damage. All Handles, Guards, Steps in Place and Doors Working. Damage Allowed on Non- Critical Panels. Doors Working. Damage Present. Doors Work.
ELECTRICAL All Gauge/Monitor Panels Work Properly Along with all Enabled Pptions. RTD Works.
Boom Float Works. Boom Kickout Works. Ride Control Works. All Lights Work Properly. Back Up Alarm Works. No Active Fault Codes.
All Gauge/Monitor Panels Work Properly Along with all Enabled options.
RTD Works.
Ride Control Works.
Lights Working Properly.
Back Up Alarm Works.
No Critical Active Fault Codes.
Critical Gauges/Monitor Working.
RTD Works.
Work and Rear Lights Working.
Back Up Alarm Works.                 No Critical Active Fault Codes.
Critical Gauges/Monitor Working Back-Up Alarm Works
BRAKES Working Properly. Working Properly. Working. Working.
TIRES 50% Work Life Remains. No Sidewall Cuts. Matched. 35% Work Life Remains. Minor Cuts/Scratches. 25% Work Life Remains. Minor Cuts/Scratches. Some Work Life Remains.
PAINT Very Good. Good. OK. Fair.
FLUIDS/FILTERS 1000 Hour Service if Needed and all New Lube Filters Installed. 1000 Hour Service if Needed and all New Lube Filters Installed. 500 Hour Service if Needed and all New Lube Filters Installed. Oil Levels Checked.
BUCKET LINKAGE 75% + of Work Life Remaining. 50% of Work Life Remaining. 25% of Work Life Remaining. Some Work Life Remaining.
WARRANTY 120 Day Parts PT/HYD. 90 Day Parts PT/HYD. 60 Day Parts PT/HYD. 30 Day Parts PT/HYD.
Minor damage = small dents, no tears in metal, side shields & grills on core products.

Major leak = any oil dripping within 5 minutes of operation at normal operating temperature.

Dust build up around area does not constitute an oil leak.

Work life refers to working range visual inspection by technician.

Receive email updates once a week of similar machinery

Name(Required)

Thanks for your interest!

We just need a few details from you.

What would you like to do?(Required)
Name(Required)

Store Hours

Monday - Friday: 7am - 6pm
Saturday: 8am - 12pm
Sunday: On call

All contents and materials © Copyright AIS Equipment 2026

Website designed and developed by Web Ascender